Asko Drying Cabinets

A drying cabinet is the quiet cousin of the dryer: you hang garments inside, close the door and let warm, moving air do the job without tumbling. Asko makes them for homes where delicate clothing, ski gear and wet coats pile up, and San Francisco’s damp, foggy months give them plenty to do. We repair the two models in our library and the faults that go with them.

Models we list

There are two cabinets on file. The Asko DC7784V.W repair page covers an electric cabinet. The Asko DC7784HP.W repair page covers a heat pump version; its availability status is unknown, so we say nothing about whether it is on sale. No series name or width is recorded for either, and we do not guess at either.

Where to read the label

Look inside the cabinet door first. The label is usually there. If it has been painted over or lies behind a rail, take a photo of whatever you can see and our article on how to find your Asko model number may help.

Why clothes stay damp

A cabinet dries by moving conditioned air past hanging garments, and moisture has to go somewhere. Condensed water collects in a tray or container, so a full container or a blocked water path will bring the process to a halt. Poor placement matters too: a cabinet crowded against a wall or stuffed with garments cannot move air. Our article Asko drying cabinet not drying goes through the likely reasons in order.

Codes on the display

Asko drying cabinets show E-numbers. These are the meanings in our verified list.

• E03: fault on the moisture sensor; it is outside its measurement range.
• E04: max time process, meaning the maximum drying time was exceeded.
• E06: check water pump; the tray level is too high and the float switch was activated.
• E12: timeout communication between the user interface and the electronics, which was temporarily interrupted.

The index page, Asko drying cabinet error codes, brings these together with what to do next.

Placement and the water tray

These cabinets are tall, so check that the floor is firm and level and that nothing blocks the door swing. Leave air space around the unit, and keep the water tray or container reachable: it needs emptying, and an overfull one trips the float switch behind E06. In a hall closet or a laundry nook the cabinet may share a wall with a washer, so make sure no hose is pinched behind it.

Owner checks

Confirm the cabinet is plugged in and the breaker is on. Make sure the door closes fully. Empty the water container if there is one, remove lint from any filter you can reach without tools, and avoid hanging so many garments that air cannot pass between them. Read the display, write down the code and try one controlled power reset. If a smell of burning or a spark appears, switch the breaker off and stop using the cabinet.

Moving to a visit

Because a cabinet is often wedged into a closet beside a washer, tell us about the surroundings too: clearance at the sides, the floor surface and how the cabinet is reached.

Frequently asked questions