Asko Drying Cabinet E03 Error Code
ERROR 03 means the moisture sensor of an Asko drying cabinet is outside its measurement range. The manual says to contact service.
Model Reference
Asko DC7784HP.W Drying Cabinet Repair, Bay Area
A heat pump drying cabinet with documented ERROR 03, 04, 06 and 12 codes, serviced in San Francisco.
- 7appliance guides
- 38model pages
- 72error codes explained
- 150Bay Area places
- Mon–Sat8:00 AM – 7:00 PM
Model number
DC7784HP.W
About this model
Model overview
This model and its codes
DC7784HP.W is a heat pump drying cabinet in our library. Its availability is not recorded, so we say nothing about whether it is still sold. What we do have is a good set of verified codes for the DC7784HP platform. The display may read “ERROR” followed by a number.
| Display | Meaning in the library |
|---|---|
| E03 / ERROR 03 | Moisture sensor outside its measurement range |
| E04 / ERROR 04 | Maximum drying time exceeded |
| E06 / ERROR 06 | Water level in the tray too high, float switch activated |
| E12 / ERROR 12 | Communication between interface and electronics interrupted |
Reading the table in plain terms
ERROR 04 says the process ran to its time limit, which often means the garments did not give up their moisture; the library notes a preset of 240 minutes, adjustable by a parameter. That setting belongs to the technician. ERROR 06 points to water that has not been removed from the tray, so the first look is at the tray and the route out of it. ERROR 03 and ERROR 12 are electronic in nature and call for testing.
Because it is a heat pump cabinet
Hot air is not vented away. The cabinet collects water, so the tray or container and its pump are routine suspects. Hanging a very wet load can fill the tray fast. In a closet recess, check for a cabinet that stands out of level, since that affects where water sits.
What you may check
- Power at the plug and breaker.
- Door fully shut with nothing in the seal.
- Water tray or container emptied.
- Any kinked drain hose straightened.
- Code written down exactly as shown, then one power reset.
Leave it alone if
There is burning smell, smoke or sparking. Breaker off first.
Visit
Provide the model text and the displayed ERROR number through Asko drying cabinet repair. We diagnose, give a written estimate and wait for your approval. For the broader family see Asko drying cabinets, and for the non heat pump version, the DC7784V.W.
Frequently asked questions
The library lists it as a water pump check: the tray water level is too high and the float switch is activated.
The library notes a preset that can be changed by a parameter. That is a technician setting, not an owner one.
Our library does not record its availability, so we cannot say.
It is listed as a timeout in communication between the user interface and the electronics. Write it down and try one power reset.
It is a heat pump model, so moisture is collected as water and not sent through a duct.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Drying Cabinet Repair in San Francisco
Repair for Asko drying cabinets in San Francisco homes: damp garments, moisture sensor and water tray codes, airflow and placement problems, written…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 993-3547
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California