Asko Dishwasher F10 Error Code
A display reading F10 means the Asko dishwasher has detected overfilling of the first kind. The manuals send owners to the drain pump.
We list the DFI663 as a current 24-inch built-in; the rest depends on your label, so start there.
Our data records the DFI663 as a current 24-inch built-in dishwasher. It does not tie the model to a named series or a launch year, and we do not guess at one. The label inside your machine is the authority, and a technician reads it before ordering anything.
Dishwashers of this kind bring the same short list of calls, whatever the number on the door.
F-numbers on Asko dishwashers each name a fault area. For example, F40 is listed as inlet valve leakage and F52 as a water level fault. Your DFI663 may show one of these or a different one, so we treat any code as a pointer. Our general piece on Asko dishwasher error codes lists what each family of codes tends to involve.
Because the unit is 24 inches wide, it sits in narrower cabinetry than many American machines. Flats on the hills of San Francisco often have older plumbing and a sink drain that was never planned for a dishwasher loop. When a DFI663 drains slowly only after the sink is used, the fault may sit downstream of the machine.
Do not take off the lower panel or work on wiring. If you smell gas anywhere in the kitchen, leave and call the gas utility from outside.
Send us the full label number and the symptoms through Asko dishwasher repair. We diagnose before repair, quote in writing and proceed only with your approval. Browse Asko dishwashers for the rest of the lineup, or look at the Asko DFI664 repair page for a neighboring number.
Our records do not name one, so we read it from your label instead.
It is listed as current.
Often a dirty filter or a drain that holds water is behind it. Clean what you can reach; if the smell stays, book a diagnosis.
We check the machine side first and tell you if the cause lies in household plumbing, which may need a plumber.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.