Asko Dryer E0 Error Code
E0 signals control unit failure on Asko TD85.11XX and TD86 dryers. Restarting is the manual step; after that a technician visit follows.
Model Reference
Asko T3HW.U Heat Pump Dryer Repair, San Francisco
A 3-series heat pump dryer in the 24-inch electric size, serviced in San Francisco.
- 7appliance guides
- 38model pages
- 72error codes explained
- 150Bay Area places
- Mon–Sat8:00 AM – 7:00 PM
Model number
T3HW.U
About this model
Model overview
If your T3HW.U has gone quiet, runs too long or stops with a number on the display, this is the short version of how we approach it.
The model on paper
The library lists T3HW.U as a 3-series heat pump dryer, 24 inches wide and electric. It is recorded as current, with ENERGY STAR availability from November 2025. We do not attribute any further features to it.
Our order of work
- Listen to what happened and when it started, including any code.
- Check the outside items: power, door, filters, water container and drain hose.
- Test the machine under load to see whether heat, air or water handling is at fault.
- Explain the finding and give a written estimate.
- Repair only after your approval.
A compact dryer in a tight spot
Newer condos in the city and remodeled in-law units favor stacked 24-inch laundry pairs inside a closet or behind bifold doors. That makes the T3HW.U easy to forget about until the filter screens clog. Because the moisture leaves as water rather than hot exhaust, there is no outside vent hood to check; the owner items are the filters and the water route.
Complaints we hear on this type
- Laundry that needs a second run.
- A door that will not latch shut with a clear click.
- A drum that spins but never warms.
- An E-number such as E8 for a button failure or E4, where the manual says to clean the filters.
Do this at home first
Clean both filters, empty the water container, straighten any bent drain hose, confirm the breaker and plug, and close the door cleanly. One power reset is fine. If the code returns, write it down together with the full model number, T3HW.U, which you can usually read near the door opening.
Know when to stop
Burning smell or sparks: breaker off, do not touch the machine, and call us once it is safe.
Ready to book
Use Asko dryer repair to send your request. You may also like the guide to clogged dryer filters, or see the Asko dryers overview. A sibling in the same year range is the T5HXLW.U.
Frequently asked questions
No. It is listed as a heat pump dryer, which means moisture is condensed and removed as water instead of going to an outside vent.
The library places the T3HW.U in Asko’s 3-series. We do not add feature claims beyond that.
The library lists it as current, with ENERGY STAR availability from November 2025.
A code points a technician toward a system, such as a sensor or the door. It does not name the failed part on its own.
You can try cleaning the filters first. If the problem stays, stop and book a diagnosis rather than running repeated loads.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Vented and heat pump Asko dryer repair across San Francisco and the Bay Area: slow drying, filters, condensate trouble, door and sensor…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 993-3547
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California