Asko Dryer E0 Error Code
E0 signals control unit failure on Asko TD85.11XX and TD86 dryers. Restarting is the manual step; after that a technician visit follows.
Model Reference
Asko T5HXLW.U Dryer Repair for San Francisco Homes
A 5-series heat pump dryer, 24 inches and electric, repaired in San Francisco.
- 7appliance guides
- 38model pages
- 72error codes explained
- 150Bay Area places
- Mon–Sat8:00 AM – 7:00 PM
Model number
T5HXLW.U
About this model
Model overview
Quick facts
5-series, heat pump, 24-inch, electric, current, ENERGY STAR available November 2025: that is the full record for the T5HXLW.U. The rest of this text is about service, not specifications.
It sits in the same compact family as the other 24-inch dryers we see in San Francisco, so the habits that keep it healthy are familiar ones: clean filters, a clear water path and some breathing room around the cabinet. A heat pump dryer also rewards patience, since its cycles are often gentler and longer than a vented drum, and that is normal. A cycle that has become much longer than it used to be is the signal worth acting on.
The code worth knowing
Our code library ties E11, an error in BLDC motor communication, to the TD86 (T5HXL) platform. If your display shows E11, the control side and the motor are not talking to each other as expected. That points a technician toward the motor circuit and its wiring, not toward a dirty filter. Still, clean the filters and check the door first, because a simple fault can leave a confusing trail.
Complaints and what they hint at
| What you notice | Where we look first |
|---|---|
| Drum will not turn | Door closing, then the motor and its control link |
| Turns but clothes stay damp | Filters, airflow, then the heat pump side |
| Water on the floor | Container, drain hose, then the pump |
| Stops with an E-number | The code page for that number |
Closet and stacking realities
Hall-closet stacks are common here, and a dryer that sits above a washer vibrates differently from a floor-standing one. We look at level, free space around the cabinet and whether the closet door is kept open while the machine works.
Owner checks
- Plug and breaker.
- Lint and condenser filters cleaned and refitted.
- Water container emptied, drain hose straight.
- Door shut firmly over the gasket.
- Code written down; one power reset only.
When to stop
Smoke, a burning smell or sparks means switching the breaker off and stepping away.
Booking
Send the label text near the door opening with your request via Asko dryer repair. We diagnose, you receive a written estimate, and you decide. The Asko dryers guide covers the wider lineup, and the T7HXLW.U page covers its 7-series neighbor.
Frequently asked questions
E11, an error in BLDC motor communication, is listed for the TD86 (T5HXL) platform.
No. It reports a communication problem. A technician tests the motor circuit before naming a part.
It is a heat pump dryer, so no outside vent is involved. Filters and the water route are the owner items.
The library lists it as 5-series.
Have the model text, the code, and a short note of when the fault started and what you already cleaned.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dryer Repair in San Francisco
Vented and heat pump Asko dryer repair across San Francisco and the Bay Area: slow drying, filters, condensate trouble, door and sensor…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 993-3547
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California